RCUPS-SYS-SMTSBC1-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    rcUpsSystems, Uint32Milli, Int32Milli, Int16, Uint16, Int16Deci, Uint16Deci, Int16Centi, Uint16Centi
        FROM RCUPS-MIB;

rcSmtSbc1MIB MODULE-IDENTITY
    LAST-UPDATED "202303261537Z"
    ORGANIZATION "Renuka's Castle"
    CONTACT-INFO
            "Martin Edgar Furter Rathod

            Postal:
            Renukas Castle
            582103 Gadag, Karnataka
            India

            E-mail: pen@renukascastle.co.in"
    DESCRIPTION
            "The MIB module to describe additional data of
            Uninterruptible Power Supply System SmtSbc1."
    REVISION     "202303261537Z"
    DESCRIPTION "initial"
    ::= { rcUpsSystems 4 }


-- data
rcSmtSbc1Data OBJECT IDENTIFIER ::= { rcSmtSbc1MIB 1 }

rcSmtSbc1DataDcVol OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - DC voltage"
    ::= { rcSmtSbc1Data 21 }

rcSmtSbc1DataDcmVol1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM1 - DC voltage 1"
    ::= { rcSmtSbc1Data 27 }

rcSmtSbc1DataDcmVol2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM2 - DC voltage 2"
    ::= { rcSmtSbc1Data 28 }

rcSmtSbc1DataInvVolt OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Inverter voltage"
    ::= { rcSmtSbc1Data 13 }

rcSmtSbc1DataInvFreq OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "Hz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Inverter frequency"
    ::= { rcSmtSbc1Data 17 }

rcSmtSbc1DataInvCurr OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Inverter current"
    ::= { rcSmtSbc1Data 14 }

rcSmtSbc1DataInvWatt OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "W"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Inverter active power"
    ::= { rcSmtSbc1Data 15 }

rcSmtSbc1DataInvVA OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "VA"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Inverter apparent power"
    ::= { rcSmtSbc1Data 16 }

rcSmtSbc1DataInvPF OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "-"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Inverter power factor"
    ::= { rcSmtSbc1Data 18 }

rcSmtSbc1DataBypVolt OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Bypass mains voltage"
    ::= { rcSmtSbc1Data 7 }

rcSmtSbc1DataBypFreq OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "Hz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Bypass mains frequency"
    ::= { rcSmtSbc1Data 11 }

rcSmtSbc1DataBypCurr OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Bypass mains current"
    ::= { rcSmtSbc1Data 8 }

rcSmtSbc1DataBypWatt OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "W"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Bypass mains active power"
    ::= { rcSmtSbc1Data 9 }

rcSmtSbc1DataBypVA OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "VA"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Bypass mains apparent power"
    ::= { rcSmtSbc1Data 10 }

rcSmtSbc1DataBypPF OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "-"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Bypass mains Power factor"
    ::= { rcSmtSbc1Data 12 }

rcSmtSbc1DataOutVolt OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Output voltage"
    ::= { rcSmtSbc1Data 1 }

rcSmtSbc1DataOutFreq OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "Hz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Output frequency"
    ::= { rcSmtSbc1Data 5 }

rcSmtSbc1DataOutCurr OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Output current"
    ::= { rcSmtSbc1Data 2 }

rcSmtSbc1DataOutWh OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "kWh"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Output kWh"
    ::= { rcSmtSbc1Data 24 }

rcSmtSbc1DataOutWatt OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "W"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Active power"
    ::= { rcSmtSbc1Data 3 }

rcSmtSbc1DataOutVA OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "VA"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Apparent power"
    ::= { rcSmtSbc1Data 4 }

rcSmtSbc1DataOutPF OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "-"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Power factor"
    ::= { rcSmtSbc1Data 6 }

rcSmtSbc1DataSysLoadPerc OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - System load percentage"
    ::= { rcSmtSbc1Data 23 }

rcSmtSbc1DataSysFanPct OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Fan duty cycle"
    ::= { rcSmtSbc1Data 26 }

rcSmtSbc1DataSysTemp OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "K"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "STS - Temperature"
    ::= { rcSmtSbc1Data 22 }

--
-- CONFORMANCE
--
rcSmtSbc1Conformance        OBJECT IDENTIFIER ::= { rcSmtSbc1MIB 255 }

rcSmtSbc1Groups             OBJECT IDENTIFIER ::= { rcSmtSbc1Conformance 1 }

rcSmtSbc1GroupData OBJECT-GROUP
    OBJECTS {
		rcSmtSbc1DataDcVol,
        rcSmtSbc1DataDcmVol1,
        rcSmtSbc1DataDcmVol2,
        rcSmtSbc1DataInvVolt,
        rcSmtSbc1DataInvFreq,
        rcSmtSbc1DataInvCurr,
        rcSmtSbc1DataInvWatt,
        rcSmtSbc1DataInvVA,
        rcSmtSbc1DataInvPF,
        rcSmtSbc1DataBypVolt,
        rcSmtSbc1DataBypFreq,
        rcSmtSbc1DataBypCurr,
        rcSmtSbc1DataBypWatt,
        rcSmtSbc1DataBypVA,
        rcSmtSbc1DataBypPF,
        rcSmtSbc1DataOutVolt,
        rcSmtSbc1DataOutFreq,
        rcSmtSbc1DataOutCurr,
        rcSmtSbc1DataOutWh,
        rcSmtSbc1DataOutWatt,
        rcSmtSbc1DataOutVA,
        rcSmtSbc1DataOutPF,
        rcSmtSbc1DataSysLoadPerc,
        rcSmtSbc1DataSysFanPct,
        rcSmtSbc1DataSysTemp
    }
    STATUS  current
    DESCRIPTION
            "all data."
    ::= { rcSmtSbc1Groups 1 }

rcSmtSbc1Compliances        OBJECT IDENTIFIER ::= { rcSmtSbc1Conformance 2 }

rcSmtSbc1DataCompliance MODULE-COMPLIANCE
    STATUS     current
    DESCRIPTION
            "The compliance statement for UPS alarm definitions."
    MODULE -- this module
        MANDATORY-GROUPS  { rcSmtSbc1GroupData }

    ::= { rcSmtSbc1Compliances 1 }

--
END