RCUPS-SYS-SMTTCS2-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    rcUpsSystems, Uint32Milli, Int32Milli, Int16, Uint16, Int16Deci, Uint16Deci, Int16Centi, Uint16Centi
        FROM RCUPS-MIB;

rcSmtTcs2MIB MODULE-IDENTITY
    LAST-UPDATED "202303261537Z"
    ORGANIZATION "Renuka's Castle"
    CONTACT-INFO
            "Martin Edgar Furter Rathod

            Postal:
            Renukas Castle
            582103 Gadag, Karnataka
            India

            E-mail: pen@renukascastle.co.in"
    DESCRIPTION
            "The MIB module to describe additional data of
            Uninterruptible Power Supply System SmtTcs2."
    REVISION     "202303261537Z"
    DESCRIPTION "initial"
    ::= { rcUpsSystems 3 }


-- data
rcSmtTcs2Data OBJECT IDENTIFIER ::= { rcSmtTcs2MIB 1 }

rcSmtTcs2DataVolAuxAC OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Auxiliary voltage AC-PSU"
    ::= { rcSmtTcs2Data 11 }

rcSmtTcs2DataVolAuxDC OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Auxiliary voltage DC-PSU"
    ::= { rcSmtTcs2Data 12 }

rcSmtTcs2DataTcsVdc1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Voltage 1 (Vdc1)"
    ::= { rcSmtTcs2Data 1 }

rcSmtTcs2DataTcsVdc2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Voltage 2 (Vdc2)"
    ::= { rcSmtTcs2Data 2 }

rcSmtTcs2DataTcsVdc3 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Voltage 3 (Vdc3)"
    ::= { rcSmtTcs2Data 3 }

rcSmtTcs2DataAmpAuxAC OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Auxiliary current AC-PSU"
    ::= { rcSmtTcs2Data 13 }

rcSmtTcs2DataAmpAuxDC OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Auxiliary current DC-PSU"
    ::= { rcSmtTcs2Data 14 }

rcSmtTcs2DataTcsIdc1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Current 1 (Idc1)"
    ::= { rcSmtTcs2Data 4 }

rcSmtTcs2DataTcsIdc2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Current 2 (Idc2)"
    ::= { rcSmtTcs2Data 5 }

rcSmtTcs2DataRiso OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "ohm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Isolation resistance"
    ::= { rcSmtTcs2Data 10 }

rcSmtTcs2DataTcsTmp1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "degr.C"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Temperature 1 (T1)"
    ::= { rcSmtTcs2Data 6 }

rcSmtTcs2DataTcsTmp2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "degr.C"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Temperature 2 (T2)"
    ::= { rcSmtTcs2Data 7 }

rcSmtTcs2DataTcsTmp3 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "degr.C"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Temperature 3 (T3)"
    ::= { rcSmtTcs2Data 8 }

rcSmtTcs2DataTcsTmp4 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "degr.C"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "TCS - Temperature 4 (T4)"
    ::= { rcSmtTcs2Data 9 }

rcSmtTcs2DataVout OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "RECTIFIER - Output voltage"
    ::= { rcSmtTcs2Data 15 }

rcSmtTcs2DataIout OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "RECTIFIER - Total output current"
    ::= { rcSmtTcs2Data 16 }

rcSmtTcs2DataPtot OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "W"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "RECTIFIER - Total power"
    ::= { rcSmtTcs2Data 17 }

rcSmtTcs2DataDcdcVout OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCDC - Output voltage"
    ::= { rcSmtTcs2Data 18 }

rcSmtTcs2DataDcdcIout OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCDC - Total output current"
    ::= { rcSmtTcs2Data 19 }

rcSmtTcs2DataDcdcPtot OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "W"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCDC - Total power"
    ::= { rcSmtTcs2Data 20 }

rcSmtTcs2DataAcm1V1 OBJECT IDENTIFIER ::= { rcSmtTcs2Data 21 }
rcSmtTcs2DataAcm1V1L1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Voltage 1 (VL1/2/3): L1"
    ::= { rcSmtTcs2DataAcm1V1 1 }
rcSmtTcs2DataAcm1V1L2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Voltage 1 (VL1/2/3): L2"
    ::= { rcSmtTcs2DataAcm1V1 2 }
rcSmtTcs2DataAcm1V1L3 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Voltage 1 (VL1/2/3): L3"
    ::= { rcSmtTcs2DataAcm1V1 3 }

rcSmtTcs2DataAcm1F1 OBJECT IDENTIFIER ::= { rcSmtTcs2Data 23 }
rcSmtTcs2DataAcm1F1L1 OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "Hz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Frequency 1/2/3: L1"
    ::= { rcSmtTcs2DataAcm1F1 1 }
rcSmtTcs2DataAcm1F1L2 OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "Hz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Frequency 1/2/3: L2"
    ::= { rcSmtTcs2DataAcm1F1 2 }
rcSmtTcs2DataAcm1F1L3 OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "Hz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Frequency 1/2/3: L3"
    ::= { rcSmtTcs2DataAcm1F1 3 }

rcSmtTcs2DataAcm1PF OBJECT IDENTIFIER ::= { rcSmtTcs2Data 24 }
rcSmtTcs2DataAcm1PFL1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "Hz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Power factor (cosphiL1/2/3): L1"
    ::= { rcSmtTcs2DataAcm1PF 1 }
rcSmtTcs2DataAcm1PFL2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "Hz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Power factor (cosphiL1/2/3): L2"
    ::= { rcSmtTcs2DataAcm1PF 2 }
rcSmtTcs2DataAcm1PFL3 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "Hz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Power factor (cosphiL1/2/3): L3"
    ::= { rcSmtTcs2DataAcm1PF 3 }

rcSmtTcs2DataAcm1I1 OBJECT IDENTIFIER ::= { rcSmtTcs2Data 22 }
rcSmtTcs2DataAcm1I1L1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Current 1 (IL1/2/3): L1"
    ::= { rcSmtTcs2DataAcm1I1 1 }
rcSmtTcs2DataAcm1I1L2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Current 1 (IL1/2/3): L2"
    ::= { rcSmtTcs2DataAcm1I1 2 }
rcSmtTcs2DataAcm1I1L3 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Current 1 (IL1/2/3): L3"
    ::= { rcSmtTcs2DataAcm1I1 3 }

rcSmtTcs2DataAcm1Pcons OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "Wh"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Consumed power"
    ::= { rcSmtTcs2Data 27 }

rcSmtTcs2DataAcm1P OBJECT IDENTIFIER ::= { rcSmtTcs2Data 25 }
rcSmtTcs2DataAcm1PL1 OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "W"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Power (PL1/2/3): L1"
    ::= { rcSmtTcs2DataAcm1P 1 }
rcSmtTcs2DataAcm1PL2 OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "W"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Power (PL1/2/3): L2"
    ::= { rcSmtTcs2DataAcm1P 2 }
rcSmtTcs2DataAcm1PL3 OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "W"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Power (PL1/2/3): L3"
    ::= { rcSmtTcs2DataAcm1P 3 }

rcSmtTcs2DataAcm1Ap OBJECT IDENTIFIER ::= { rcSmtTcs2Data 26 }
rcSmtTcs2DataAcm1ApL1 OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "VA"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Apparent power (SL1/2/3): L1"
    ::= { rcSmtTcs2DataAcm1Ap 1 }
rcSmtTcs2DataAcm1ApL2 OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "VA"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Apparent power (SL1/2/3): L2"
    ::= { rcSmtTcs2DataAcm1Ap 2 }
rcSmtTcs2DataAcm1ApL3 OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "VA"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "ACM1 - Apparent power (SL1/2/3): L3"
    ::= { rcSmtTcs2DataAcm1Ap 3 }

rcSmtTcs2DataDcm1Vdc1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM1 - DC voltage 1 (Vdc1)"
    ::= { rcSmtTcs2Data 28 }

rcSmtTcs2DataDcm1Vdc2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM1 - DC voltage 2 (Vdc2)"
    ::= { rcSmtTcs2Data 29 }

rcSmtTcs2DataDcm1Idc OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM1 - Current (Idc)"
    ::= { rcSmtTcs2Data 30 }

rcSmtTcs2DataDcm1Riso OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "ohm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM1 - Isolation resistance"
    ::= { rcSmtTcs2Data 32 }

rcSmtTcs2DataDcm1Tmp OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "degr.C"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM1 - Temperature"
    ::= { rcSmtTcs2Data 31 }

rcSmtTcs2DataDcm2Vdc1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM2 - DC voltage 1 (Vdc1)"
    ::= { rcSmtTcs2Data 33 }

rcSmtTcs2DataDcm2Vdc2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM2 - DC voltage 2 (Vdc2)"
    ::= { rcSmtTcs2Data 34 }

rcSmtTcs2DataDcm2Idc OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM2 - Current (Idc)"
    ::= { rcSmtTcs2Data 35 }

rcSmtTcs2DataDcm2Riso OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "ohm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM2 - Isolation resistance"
    ::= { rcSmtTcs2Data 37 }

rcSmtTcs2DataDcm2Tmp OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "degr.C"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM2 - Temperature"
    ::= { rcSmtTcs2Data 36 }

rcSmtTcs2DataDcm3Vdc1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM3 - DC voltage 1 (Vdc1)"
    ::= { rcSmtTcs2Data 38 }

rcSmtTcs2DataDcm3Vdc2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM3 - DC voltage 2 (Vdc2)"
    ::= { rcSmtTcs2Data 39 }

rcSmtTcs2DataDcm3Idc OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM3 - Current (Idc)"
    ::= { rcSmtTcs2Data 40 }

rcSmtTcs2DataDcm3Riso OBJECT-TYPE
    SYNTAX      Uint32Milli
    UNITS       "ohm"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM3 - Isolation resistance"
    ::= { rcSmtTcs2Data 42 }

rcSmtTcs2DataDcm3Tmp OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "degr.C"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "DCM3 - Temperature"
    ::= { rcSmtTcs2Data 41 }

rcSmtTcs2DataFc1Tmp1 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "degr.C"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "FC1 - Temperature 1"
    ::= { rcSmtTcs2Data 43 }

rcSmtTcs2DataFc1Tmp2 OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "degr.C"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "FC1 - Temperature 2"
    ::= { rcSmtTcs2Data 44 }

rcSmtTcs2DataBatVtot OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY - Total voltage"
    ::= { rcSmtTcs2Data 53 }

rcSmtTcs2DataBatItot OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY - Total current"
    ::= { rcSmtTcs2Data 54 }

rcSmtTcs2DataBatTmp OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "degr.C"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY - Overall temperature"
    ::= { rcSmtTcs2Data 55 }

rcSmtTcs2DataBat1V OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY STRING 1 - Voltage"
    ::= { rcSmtTcs2Data 45 }

rcSmtTcs2DataBat1I OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY STRING 1 - Current"
    ::= { rcSmtTcs2Data 46 }

rcSmtTcs2DataBat2V OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY STRING 2 - Voltage"
    ::= { rcSmtTcs2Data 47 }

rcSmtTcs2DataBat2I OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY STRING 2 - Current"
    ::= { rcSmtTcs2Data 48 }

rcSmtTcs2DataBat3V OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY STRING 3 - Voltage"
    ::= { rcSmtTcs2Data 49 }

rcSmtTcs2DataBat3I OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY STRING 3 - Current"
    ::= { rcSmtTcs2Data 50 }

rcSmtTcs2DataBat4V OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "V"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY STRING 4 - Voltage"
    ::= { rcSmtTcs2Data 51 }

rcSmtTcs2DataBat4I OBJECT-TYPE
    SYNTAX      Int32Milli
    UNITS       "A"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "BATTERY STRING 4 - Current"
    ::= { rcSmtTcs2Data 52 }

--
-- CONFORMANCE
--
rcSmtTcs2Conformance        OBJECT IDENTIFIER ::= { rcSmtTcs2MIB 255 }

rcSmtTcs2Groups             OBJECT IDENTIFIER ::= { rcSmtTcs2Conformance 1 }

rcSmtTcs2GroupData OBJECT-GROUP
    OBJECTS {
		rcSmtTcs2DataVolAuxAC,
        rcSmtTcs2DataVolAuxDC,
        rcSmtTcs2DataTcsVdc1,
        rcSmtTcs2DataTcsVdc2,
        rcSmtTcs2DataTcsVdc3,
        rcSmtTcs2DataAmpAuxAC,
        rcSmtTcs2DataAmpAuxDC,
        rcSmtTcs2DataTcsIdc1,
        rcSmtTcs2DataTcsIdc2,
        rcSmtTcs2DataRiso,
        rcSmtTcs2DataTcsTmp1,
        rcSmtTcs2DataTcsTmp2,
        rcSmtTcs2DataTcsTmp3,
        rcSmtTcs2DataTcsTmp4,
        rcSmtTcs2DataVout,
        rcSmtTcs2DataIout,
        rcSmtTcs2DataPtot,
        rcSmtTcs2DataDcdcVout,
        rcSmtTcs2DataDcdcIout,
        rcSmtTcs2DataDcdcPtot,
        rcSmtTcs2DataAcm1V1L1,
        rcSmtTcs2DataAcm1V1L2,
        rcSmtTcs2DataAcm1V1L3,
        rcSmtTcs2DataAcm1F1L1,
        rcSmtTcs2DataAcm1F1L2,
        rcSmtTcs2DataAcm1F1L3,
        rcSmtTcs2DataAcm1PFL1,
        rcSmtTcs2DataAcm1PFL2,
        rcSmtTcs2DataAcm1PFL3,
        rcSmtTcs2DataAcm1I1L1,
        rcSmtTcs2DataAcm1I1L2,
        rcSmtTcs2DataAcm1I1L3,
        rcSmtTcs2DataAcm1Pcons,
        rcSmtTcs2DataAcm1PL1,
        rcSmtTcs2DataAcm1PL2,
        rcSmtTcs2DataAcm1PL3,
        rcSmtTcs2DataAcm1ApL1,
        rcSmtTcs2DataAcm1ApL2,
        rcSmtTcs2DataAcm1ApL3,
        rcSmtTcs2DataDcm1Vdc1,
        rcSmtTcs2DataDcm1Vdc2,
        rcSmtTcs2DataDcm1Idc,
        rcSmtTcs2DataDcm1Riso,
        rcSmtTcs2DataDcm1Tmp,
        rcSmtTcs2DataDcm2Vdc1,
        rcSmtTcs2DataDcm2Vdc2,
        rcSmtTcs2DataDcm2Idc,
        rcSmtTcs2DataDcm2Riso,
        rcSmtTcs2DataDcm2Tmp,
        rcSmtTcs2DataDcm3Vdc1,
        rcSmtTcs2DataDcm3Vdc2,
        rcSmtTcs2DataDcm3Idc,
        rcSmtTcs2DataDcm3Riso,
        rcSmtTcs2DataDcm3Tmp,
        rcSmtTcs2DataFc1Tmp1,
        rcSmtTcs2DataFc1Tmp2,
        rcSmtTcs2DataBatVtot,
        rcSmtTcs2DataBatItot,
        rcSmtTcs2DataBatTmp,
        rcSmtTcs2DataBat1V,
        rcSmtTcs2DataBat1I,
        rcSmtTcs2DataBat2V,
        rcSmtTcs2DataBat2I,
        rcSmtTcs2DataBat3V,
        rcSmtTcs2DataBat3I,
        rcSmtTcs2DataBat4V,
        rcSmtTcs2DataBat4I
    }
    STATUS  current
    DESCRIPTION
            "all data."
    ::= { rcSmtTcs2Groups 1 }

rcSmtTcs2Compliances        OBJECT IDENTIFIER ::= { rcSmtTcs2Conformance 2 }

rcSmtTcs2DataCompliance MODULE-COMPLIANCE
    STATUS     current
    DESCRIPTION
            "The compliance statement for UPS alarm definitions."
    MODULE -- this module
        MANDATORY-GROUPS  { rcSmtTcs2GroupData }

    ::= { rcSmtTcs2Compliances 1 }

--
END